Wet drawing machine for low carbon steel
Purpose: For the drawing of low carbon steel wires, such as binding wire, nail wire, netting wire etc.
Classification:
wet drawing machine
Keywords: metal wire products equipment
Contact Us
Product Description
Purpose: For the drawing of low carbon steel wires, such as binding wire, nail wire, netting wire etc.
No. |
Model |
LD-1/560+LT—11/450+XB600 |
LT-18/300+ZWS—ZWS—630 |
1 |
Machine type |
Combined | Separated |
2 |
Inlet wire dia. |
Φ5.5mm-Φ6.5mm | Φ1.8mm-Φ2.2mm |
3 |
U.T.S. |
≤400mpa | ≤700mpa |
4 |
Outlet wire dia. |
Φ2.2mm-Φ2.6mm |
Φ0.60mm-Φ1.0mm |
5 |
Max. draw number |
12(1 dry die+11 wet dies) | 18 |
6 |
Inlet die box |
Enhanced lubricating pressure die | Enhanced lubricating pressure die |
7 |
Max. reduction ratio |
92.30% |
92% |
8 |
Accelerating ratio |
1:1.14—1:1.18 |
1:1.12—1:1.165 |
9 |
Capstan diameter |
560mm(for die No.1&2) | 105.66mm(for die No.1) |
10 |
Max. pulley dia. |
560mm | 300mm |
11 |
Traction pulley Dia. |
450mm | 280mm |
12 |
Max. speed |
450m/s( for Φ2.2mm时) |
900m/s(for Φ0.55mm-Φ0.7mm) |
13 |
Motor power |
18.5Kw×1 dry drawing+Main drawing 90Kw+coiler18.5Kw | Main machine 37Kw,15Kw for 630mm spool |
14 |
Motor mounting |
Installed inside machine frame | |
15 |
Die size |
PCD for wet drawing) | Φ30mm×18(PCD) |
16 |
Cone pulley setting |
Two sets of driving pulleys, and one set of driven pulleys, a total of three shafts |
|
17 |
Pulley material |
Alloy with heat treatment (inlaid with Tungsten material), cast iron for guiding pulley |
|
18 |
Pulley mounting |
Front and back arrangement for two sets of pulleys | |
19 |
Pulley type |
Driving pulleys are ring-type with solid cones, Guiding pulleys and by-pass pulleys are single piece type |
|
20 |
Capstan and traction pulley |
T.C. Coated |
|
21 |
Cooling tank |
The cooling system should be provided by the final user | |
22 |
Take-up by |
600 coiler | 630mm take-up spooler |
23 |
Machine frame |
Welded by steel pipe and steel plate | |
24 |
Transmission |
Gearbox | Synchronous belt driving |
25 |
Bearing supporting |
Sealed-type bearing support | |
26 |
Bearing brand |
NSK | |
27 |
Bearing lubricating |
Concentrated by the oil pump | Separated greasing |
28 | Safety device |
With safety cover |
|
29 |
Electrical cabinet |
Rittal type with IP54 | |
30 |
PLC & HMI |
INOVANCE | |
31 | Low voltage components | SCHNEIDER BRAND | |
32 |
Drive |
INOVANCE 500 TYPE | |
33 |
Displacementsensor |
LANBAO BRAND | |
34 | Machine color |
Mainframe RAL7024, Inside RAL7032, Cover RAL7035 |
|
35 |
Machine weight | 14150Kg |
4600Kg |
Previous Page
Related Products
online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.