Vertical pay-off with hydraulic lifting for wire rod

The overhead wire dispenser is used to vertically dispense wire from rolled wire coils of up to 2.5 tons for wire diameter of 5.0mm -6.5mm. The force needed for dispensing must be provided by a drawing machine, the tower consists of a stable welded design. This design includes a mobile deflection carriage, which can be lowered to operating height for threading the wire by means of a steel wire rope pull. If some coils of the wire remain tangled during dispensing and run in the shape of a loop over the upper deflection roller, the flap performs a turning movement that is caught by an initiator. During the turning movement of the flap, the initiator triggers an emergency stop for the entire system and the dispensing process is interrupted. Which avoids a break in the wire.

Classification:

Welding wire, Electrodes production line machine

Keywords: metal wire products equipment

Product Description

Specification	Technical Data
Pay-off stand number	2
Wire coil stand lifting	By hydraulic device
Payoff wire rod diameter	Φ5.5mm-Φ6.5mm
Wire tensile strength	less than 600/mm²
Wire dispensing speed	Dependent on wire drawing machine
Direction of wire movement	from left to right or right to left
Wire payoff height	1200mm
Wire rod weight	2T×2 coils
Pay-off stand height(from ground)	Max. 7500mm
Horizontal stand centreline height	1200mm
Overhead wire catcher power	1.5KW
Stand rotation power	2.2KW
Hydraulic station power	4KW
Hydraulic station volumn	150L
Hydraulic station rate of flow	14L/min
Hydraulic station oil and volumn	oil 46# 96L
Hydraulic station pressure	12MPa
Hydraulic station control power voltage	24V
Hydraulic station weight	280Kg
Electrical voltage	380V, 50HZ
Machine size (wire stand at horizontal position )	7085×5136×7500mm
Machine weight	5500KG
Relative humidity	<75%
Space for repair and assembly	1 meter on each side
Machine weight	5500KG