Pure zinc, zinc alloy wire drawing machine (from 3.5mm to 1.2mm)

This is the pure zinc wire drawing machine, zinc alloy wire drawing machine, to reduce pure zinc wire and zinc alloy wire from 4.5~2.6mm to 2.0~1.0mm.

Classification:

Zinc/Zinc alloy wire production line

Keywords: metal wire products equipment

Product Description

This is the pure zinc wire drawing machine, zinc alloy wire drawing machine, to reduce pure zinc wire and

zinc alloy wire from 4.5~2.6mm to 2.0~1.0mm.

Zinc Wire Drawing machine with pail packing machine.
Specification	Technical data
Drawing machine and drum packing machine	Installed together
Max cone pulley diameter	Φ280mm
Max traction pulley diameter	Φ280mm
Min. traction pulley diameter	Φ165.7mm
Mechanical speed-increasing ratio	1：1.06 (adjustable for last die)
Draw number	23
Inlet wire tensile	≤350Mpa
Drawing die chain	From Φ4.5mm to Φ2.0mm From Φ4.1mm to Φ1.6mm From Φ2.6mm to Φ1.0mm
Max. reduction ratio	85.2%
Average reduction	Φ8%
Max. designed speed	600m/min 450m/min for normal production
Speed control	Speed limitation control for different diameters
Main drawing motor power	30KW+5.5KW(last block)
Die size	Φ30 X22mm(PCD) Dies should be provided by the final user
Cone pulley	Two sets (four groups of pulleys)
Cone pulley surface	T.C.Coated
Cone pulley structure	Separated type
Machina direction	From left to right
Cooling system	Outside lubricant recycling, cooling The final user should provide a cooling tank
Transmission	By the timing belt
Electrical cabinet	IP54
PLC & HMI	INOVANCE
Motor brand	HENGDA
Motor drive	INOVANCE
Compressed air/Water/Electrical supply	To be provided by the final user