Pure zinc, zinc alloy wire drawing machinne (from 8.0mm to 2.8mm)

Classification:

Zinc/Zinc alloy wire production line

Keywords: metal wire products equipment

Product Description

This wet drawing machine is designed for pure zinc and zinc alloy wire drawing production,

it can deal pure zinc and zinc alloy wire with upto 8.0mm material, and it can reduce pure zinc and

zinc alloy wire to diameter Φ2.8mm to Φ3.0mm

LT-13/400 Type Zinc Wire Drawing machine with pail packing machine
Specification	Technical data
Drawing machine and drum packing machine	Installed together
Inlet wire diameter	Up to Φ8.0mm
Outlet wire diameter	Φ2.8mm to Φ3.0mm
Draw number	13
Inlet wire tensile	≤200Mpa
Max. reduction ratio	80.80%
Traction pulley diameter	Φ400mm
Max. designed speed	300m/min
Speed control	Speed limitation control for different diameters
Main drawing motor power	45KW
Die size	Φ40 X23mm(PCD) Dies to be prepared by the final user
Cone pulley	Two sets (four groups of pulleys)
Cone pulley surface	T.C.Coated
Cone pulley structure	Separated type
Take-up type	Dead-block coiler
Take-up motor power	11KW
Machina direction	From left to right
Cooling system	Outside lubricant recycling, cooling
Cooling system	The final user should provide a cooling tank.
Transmission	By the timing belt
Electrical cabinet	IP54
PLC & HMI	INOVANCE
Motor brand	HENGDA
Motor drive	INOVANCE
Compressed air/Water/Electrical supply	To be provided by the final user
Size	6700X2300X2000mm