Sand belt grinding de-scaler type

Classification:

Mig/Co2/SAW Welding wire production line

Sand belt grinding machine

Keywords: metal wire products equipment

Product Description

No.	Item	Technical specification
1	Model	SDJ—1300—C				SDJ-1540-D
2	Composition	the main machine and the electrical cabinet
3	Material to treat	Low, middle, and high carbon steel wire rod
4	Wire diameter range	Φ5.5mm to Φ14mm			Φ12mm to Φ26mm
5	Wire tensile strength	U.T.S. 400mpa—1250mpa
6	Wire height	900mm from the ground or customized
7	Wire movement direction	From left to right or from right to left as per customer requirement
8	Wire movement	Pulled by a wire drawing machine (provided by the final user)
9	Max. wire rod linear speed	For wire rod Φ5.5mm—Φ6.5mm, feeding speed≤150m/min For wire rod Φ8.0mm—Φ9.0mm, feeding speed≤100m/min For wire rod Φ12.0mm—Φ14.0mm, feeding speed≤100m/min				For wire rod Φ8mm—Φ10mm, feeding speed≤150m/min For wire rod Φ12mm—Φ14mm, feeding speed≤120m/min For wire rod Φ20mm—Φ26.0mm, feeding speed≤65m/min
10	Belt linear speed	2.8m/s（while 50HZ）
11	Belt supporting Roller	two rollers, with a supporting device, one roller is covered of rubber material, one roller is made of steel material
	Belt supporting roller diameter	Φ120mm		Φ150mm
	Wire support device	Roller-type wire carrier device Roller for Φ5.5mm—Φ6.5mm, one set Roller for Φ8.0mm—Φ9.0mm, one set Roller for Φ13mm—Φ14mm, one set
12	Segmented speed	Three kinds of speed to be set as per the different belt working situations
13	Main shanft motor power	Main shaft motor 15.0KW, HENGDA Brand				Main shaft motor 22.0KW, HENGDA Brand
14	Belt motor power	Gearmotor with 4KW				Gearmotor with 5.5KW
15	Sanding Belt Size	Φ1300mm(perimeter)×292mm(width)				Φ1540mm(perimeter)×292mm(width)
16	Belt number	2 numbers, inlet and outlet position, To be ordered separately
17	Belt tension control	Automatic balancing device for the belt
18	Suction device	Suction system to be provided by the final user (Optional)
19	Suction joint	Joint point Φ100mm by two pipes
20	Electrical Control cabinet	Rittal type cabinet
21	IP Protection Class	IP54
22	Control system	Single movement or combined movement with a wire drawing machine
23	PLC& touch screen brand	Delta Brand
24	Belt break detection	Proximity switch wire break sensor
25	Low-voltage parts	SCHNEIDER Brand
26	Inverter Brand	INNOVANCE or Delta Brand China
27	Remote diagnosis module	Remote module is included, it can provide remote software technical support, Inovance brand
28	Electric power supply	3PHASE 380V,50HZ
29	Compressed air pressure	Min. 0.6MPa, Provided by the final user
27	Machine weight	3360KG	4500KG
30	Land occupation LXBXH	3900×1620×1650mm	4300×1720×1750mm